A4 Paper Cutter

$3,500.00

  • Type:A4 Paper Steel Cutter
    Brand:Comix
    Cutting Width Max:300 mm
    Cutting Capacity:5 to 10 Sheets
    Specification:3000x250mm
    Weight:2.2
    Warranty:One Year Warranty

Product total

Options total

Grand total

Category:

Description

A4 Paper Cutter A4 Paper Cutter

  • Accurate cutting, no deckle, no pinking and no break
  • A Metal Base A-4 Size Paper Cutter For Precise And Easy Cutting.
  • Indicates Paper Size  A4/B5/B6/B7/A5 Post Card And Photo (L) Sizes.
  • Easy Adjustment For Cutting Into Desired Sizes.Can Cut 10 Sheets Of 70GSM At A Time.

Safety Tips

Most paper cutters come equipped with a finger guard to prevent users from accidentally cutting themselves or severing a digit while using the apparatus. However, injuries are still possible if the device is not used with proper care or attention.

Type: A4 Paper Steel Cutter
Brand: Comix
Cutting Width Max: 300 mm
Cutting Capacity: 5 to 10 Sheets
Specification: 3000x250mm
Weight: 2.2
Warranty: One Year Warranty

What is Paper Cutter?

Paper cutters vary in size, usually from about 30 centimetres (1 ft) in length on each side for office work to 841 millimetres (33.1 in) (an edge of A1 paper) in design workshops. The surface will usually have a grid either painted or inscribed on it, often in half-inch increments, and may have a ruler across the top. At the very least, it must have a flat edge against which the user may line up the paper at right-angles before passing it under the blade. It is usually relatively heavy, so that it will remain steady while in use.

On the right-hand edge is a long, curved steel blade, often referred to as a knife, attached to the base at one corner. Larger versions have a strong compression coil spring as part of the attachment mechanism that pulls the knife against the stationary edge as the knife is drawn down to cut the paper. The other end of the knife unit is a handle. The stationary right edge of the base is also steel, with an exposed, finely-ground edge. When the knife is pulled down to cut paper, the action resembles that of a pair of scissors, only instead of two knives moving against each other, one is stationary. The combination of a blade mounted to a steady base produces clean and straight cuts, the likes of which would have otherwise required a ruler and razor blade to achieve on a single page. Paper cutters are also used for cutting thin sheet metal, cardboard, and plastic. The blade on a paper cutter is made of steel, which provides long-term durability. The steel blade can be resharpened as needed.

A variant design uses a wheel-shaped blade mounted on a sliding shuttle attached to a rail. This type of paper cutter is known as a rotary paper cutter. Advantages of this design include being able to make wavy cuts, perforations or to simply to score the paper without cutting, merely by substituting various types of circular blades. With a rotary cutter, it is also almost impossible for the user to cut oneself, except while changing the blade. This makes it safer for home use. Higher-end versions of rotary paper cutters are used for precision paper cutting and are popular for trimming photographs.

An even simpler design uses double-edged blades which do not rotate, but cut like a penknife.[clarification needed] While cheaper, this design is not preferable for serious work due to its tendency to tear paper, and poor performance with thick media.

 

 

Can a paper cutter cut plastic?
Yes Possible, this kind of cutters powerful enough to cut through thick materials like balsa and corkboard, our paper cutters can be used for project-based cuts on lightweight craft materials like photos and cardstock, high volume outputs and more.

Reviews

There are no reviews yet.

Be the first to review “A4 Paper Cutter”

Your email address will not be published.

Born To Be Wild

Proudly powered by WordPress